Today (February 5), the IT Service Desk software has been upgraded to a new version. The system brings a range […]
Please be aware of the following changes to print copy services in the Hive.
BY 1150 Self Service Page
Teaching space found on the upper floor of the Binyon building.
Please scroll down to see support details. These details include; written text, video and image instructions.
If you are unable to resolve your issue using the support pages please call the IT Service Desk 01905 85 7500 08:30am to 5:00pm. Analysts will be happy to walk through the checks with you before escalating your ticket. For major technical disruptions, please call right away.
If you require assistance locating or using specific lectern equipment, please see the below guides for basic troubleshooting.
The lectern houses all of the equipment required to teach and present. With a microphone, Doc-camera, Peripherals and PC.
Faults with the audio communication equipment should be reported to the IT Service Desk 01905 85 7500
The microphone equipment is powered on as standard and will sync with the room’s sound systems automatically. You can mute the microphone using the Crestron panel should you desire.
Faults with the Document Camera should be reported to the IT Service Desk 01905 85 7500
To use the document camera, you will find the correct display input option on the Crestron panel, labelled ‘Doc Camera’.
Controls for the Document Camera can be found on the top of the base of the unit, the camera can be found at the end of the adjustable arm. Please look for the LED power indicator and ensure that the device is powered on.
Power in and HDMI out are located at the rear of the base of the unit.
The PC is housed within a cutout. Please check that it is powered on, any issues with the PC should be reported to the IT Service Desk 01905 85 7500
The lectern PC is housed within the cabinet section of the lectern. The power button and several USB inputs are accessible to users through the cutout provided for access.
If there is no display on the large screen or if there is a display powered on with no image, please follow the steps below to check for basic faults.
The correct input option to display the lectern panel is ‘PC’. Please allow a few seconds for the capture devices to sync after the option has been selected.
To use external devices, please see the section below on bring your own devices.
Holding down the Window’s key ⊞ and pressing the letter ‘P’ will bring up the ‘Project’ menu settings. Here you can change how your display is shared to other connected displays. If you are using a lectern PC or Laptop, ensure that ‘Duplicate’ or ‘Extend’ is selected so that the desktop can be shown on the large projection screen.
Usng the Source / Input button on the Smart Board, please selecting the Input menu.
Please select the ‘Input’ option and wait for the sources to present for selection.
The options for Inputs will show you previews of the sources, please select the option marked ‘Room PC’.
If you experience any technical problems please contact the IT Service Desk 01905 85 7500.
Please ensure that the connections for Display, HDMI and power are all connected securely.
Extensive stress and movement of the monitor and monitor arm may cause these connections to become unseated.
For damaged cables, Please contact the IT Service Desk 01905 85 7500 and speak to an available analyst.
You may need to power the sceen on if it was turned off previously or shut down. The power button can be found at the top of the control panel.
If there is no sound or the sound is too quiet, please follow the steps below to check for basic faults.
The correct sound output option for the room speakers is the ‘Crestron 420 *intel(R) Display Audio)’ output. Selecting anything else may lead to users being unable to hear the intended sound from the display.
From here you can also check to see what volume setting is selected for that output device.
Other sound options are available. If you believe there is a fault with the Crestron system and sound does come out of other devices. Please contact the IT Service Desk 01905 85 7500 and speak to an available analyst.
Using the volume dial on the Crestron Panel, adjust the volume to suite your needs. By default it should be at a sage audible level. (Be careful not to over turn the dial and increase the volume past safe limits as this may result in the audio devices being disabled to prevent damage.)
If this does not work or you are still unable to hear sound, please contact the IT Service Desk 01905 85 7500 and speak to an available analyst.
If you believe there to be a fault with the audio equipment within the Lectern, please contact the IT Service Desk 01905 85 7500 and speak to an available analyst.
To use your own device, work laptop or similar display equipment (BYOD) or to check for faults with the peripheral equipment in the room, please follow these steps to check for basic faults.
The external display port of your University of Worcester laptop is shown here. It is found on the right side of your laptop and is marked with ‘HDMI’. Match this port with the corresponding connection cable leading from the lectern.
Other external display cables are available, and can be found attached to the Kramer cable bundle. If you are using a device not provided by the University of Worcester, please check for an approriate connection within the bundle as we may not be able to support your device if it is not found there.
If you wish to use any other external input please select your desired input option from the options on the Crestron panel. Your options are HDMI and VGA. Your work laptop is most likely use HDMI.
Should you find that your device is not displaying correctly, please refer to the section on ‘No Display/ No Signal’ for basic fault finding solutions. If you need further support, please contact the IT Service Desk 01905 85 7500 and speak to an available analyst who will be happy to assist.